Novista Group Holding Co, Ltd (Shandong Novista Chemicals Co, Ltd)
Tel：+86 0536 8206760
Fax：+86 (0)536 8206750
Mobile：+86 151 662 10494
Email: sales03@novistagroup.com
ProFlame® PN2131C
ProFlame-PN2131C is formulated flame retardant based on organic phosphorus component. It is suited for GF-reinforced PA6/PA66 system.
The polyamide compounds exhibit very good physical and electrical properties with PN2131C.
It is mixture of columned granule and powder, this will be helpful to reduce dust ,and make material easy to dispersing and feeding.
Appearance type 1: Mixed white particles and powders without carrier
Mainly suitable for customers with weight-loss-scale or short mixing time with the base material.
Appearance type 2: White powder
Mainly suitable for feeding together with main raw materials directly after high-speed mixing
Technical Data:
Items Spec
Appearance White free-flowing powder/columned granule
P content, % 20-22
Decomposition Temperature, °C ≥350
Average particle size, um ≤10
Moisture,% ≤0.5
Whiteness ≥95
Recommended dosage:
Polymer | Dosage | UL-94 | GWIT | CTI |
30%GF-Reinforced PA6 | 16-18% | V0(0.8-1.6mm) | 730°C (2mm) | 600V(4mm) |
30%GF-Reinforced PA66 | 16-18% | V0(0.8-1.6mm) | 730°C (2mm) | 600V(4mm) |
Processing instruction:
1. Pre-drying the polyamide,the moisture content should be below 0.1 % (by wt.).
2. The optimum conditions for incorporating should be determined in each individual case. Care must be taken to ensure homogeneous dispersion of all components.
3. In PA66 with GF30 system, the recommended extrusion temperature is 245°C-265°C; In PA6 with GF30 system, the recommended temperature is 225°C - 250°C.
4. It is most suitable for equipment with weak shear force.
5. High-quality non-alkali fiberglass is preferred.
Package & Storage:
Net weight 25KG Kraft bag with PE liner.
Minimum shelf life is 12 months stored in a dry and ventilated warehouse.
